This is a one component fast air drying chlorinated polyolefins based adhesion promoter for difficult to adhare to substrates. It promotes adhesion to polypropylene, TPO and other plastics.
This product is recommended to apply diectly over various plastic surfaces to enhance adhesion to subsequent
paint/ ink or coatings. It is highly recommended to be used over polypropylene, thermoplastic polyolefins (TPO)
plastics used in applications such as automotive parts, toys, appliances, containers etc to protect or to provide
aesthetic looks to plastic parts.
Colour
Colourless Liquid/ Grey
Finish
Matt
Soild by Volume
04 ± 1%
Supply Weight (Kg/ Ltr)
0.90±0.02
Flash Point
27° C
Dry Heat Resistance
Intermittent : 100'C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
05-10μ in single coat
Therotical Coverage Rate
5.00 sq.mt / lit at recommended DFT of 10μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent (Isopropyl Alcohol) cleaning.
New Surface : The fresh or New Plastic surface should be dry and free from all contamination and Indokote IK-70
should be applied immediately after Isopropyl Alcohol cleaning. Topcoat should be applied within the overcoating intervals specified.
Repair Cases : Used or old plastic shuold be clean with appropiate degreasers to remove oil, grease, dust or any other contamination. Later surface should be cleaned IPA before applying IK-70. Topcoat should be applied within the overcoating intervals specified and maximum in 10 minutes.
Application Method
Conventional Spray Only
Mixing Ratio
One Component Coating
Pot Life
NA
Thinner and Cleaner
Ready to Use
Airless Nozzle Orifice
1.3 - 1.5mm
Nozzle Pressure
25-28 psi
Download Brochure