Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the updraftplus domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home1/indoksf5/public_html/wp-includes/functions.php on line 6114
Indopoxy IK.15 – Solventless Epoxy Coating cum Tank Lining Indopoxy IK.15 – Solventless Epoxy Coating cum Tank Lining

Solventless Epoxy High Performance Coating

Indopoxy IK-15 is a solvent free, pigmented, two component, epoxy based coating specially formulated as internal coating of Steel or Concrete tanks for storage of Crude Oils, Aliphatic and Aromatic Hydrocarbons/ solvents etc. In cured condition, it is hard, tough, abrasion resistant material. IK-15 is suitable for safe storage of potable water and other edible oils or food products also. It has excellent resistance to water and many chemicals used for food processing.

  • Colour

    Light Grey & Limited Shades

  • Finish

    Semi Glossy

  • Soild by Volume

    99 ± 1%

  • Supply Weight (Kg/ Ltr)

    1.60±0.05

  • Flash Point

    95° C

  • Dry Heat Resistance

    Intermittent : 120°C, Continuous : 120°C

  • Shelf Life

    12 months

Film Thickness

Recommended film thickness per coat

  • Dry Film Thickness

    200-400μ in single coat

  • Wet Film Thickness

    200-400μ in single coat

  • Therotical Coverage Rate

    5.0 sq.mt / lit at recommended DFT of 200μ

All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning.


Repair Cases : Corroded areas should be power tool cleaned to St3 or blast cleaned to Sa2 or better. Existing system should be dry and free from loose paint, salt, grease and other contaminants prior to overcoating.


New steel : Abrasive blasting to Sa 2½ (ISO 8501-1:2007). All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting.


Maintenance : Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Clean damaged areas thoroughly by power tool cleaning to St 3 (ISO 8501-1:2007) (minor areas) or by abrasive blasting to min. Sa 2, preferably to Sa 2½ (ISO 8501-1:2007). Improved surface preparation will improve the performance of the product.


Aged Surface : Indopoxy IK.15 is suitable for overcoating a limited range of intact, tightly adherent aged coatings. Loose or flaking coatings should be removed back to a firm edge. Glossy finishes require light abrasion by emery paper or power tool to provide a physical key.

  • Application Method

    Airless Spray (Highly Recommended)
    : Brush/ Roller ( Only Touch up, small areas/ edges)

  • Mixing Ratio

    3 Part (Base) : 1 Part (Hardener)

  • Pot Life

    One Hours at 30°C

  • Thinner and Cleaner

    Indopoxy Epoxy Thinner (IK.1501)

  • Airless Nozzle Orifice

    0.45 - 0.53mm

  • Nozzle Pressure

    176 kg/cm² or 2500 psi

quick inquiry