Single component Modified Alkyd based rust inhibitive, General Purpose uses primer pigmented with Zinchrome and Natural Red Oxide as corrosion inhibiting pigment.
It is recommended as primer on M.S. surface for General Industries, i.e. various Bus and Truck Body builders, Fabrication Industries, PEB industries, Forging and Casting Industries, Heavy machineries etc, where fast turn around is required. Indofast 310 is quick drying primer and is suitable for coating on hand prepared substrates or as a maintenance coating.
Colour
Redoxide
Finish
Matt to Eggshell (10-40 GU at 60° angle)
Soild by Volume
50 ± 3%
Supply Weight (Kg/ Ltr)
1.25±0.05
Flash Point
31° C
Dry Heat Resistance
Intermittent : 120°C, Continuous: 100°C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
40-70μ in single coat
Wet Film Thickness
80-140μ in single coat
Therotical Coverage Rate
12.50 sq.mt / lit at recommended DFT of 40μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning. This product is suitable for use over phosphate washed steel.
Steel : Abrasive blast clean to a minimum of Sa2½ (ISO 8501-1:2007). Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner. A surface profile of 30-40 microns is recommended.
Maintenance : The surface should be hand or machine abraded or hand abrasive pads to impart a scratch pattern to the surface and to remove all polish from the surface. Else abrasive sweep blast to a standard similar to ISO 8501-1:2007 Sa1 to create a surface profile. 310 is suitable for overcoating on aged surfaces. Bursh application is recommended in case of poor surfaces.
Primed Surface : Already primed (or wash primed) surface should be dry and free from all contamination and Indofast 310 should be applied within the overcoating intervals specified in earlier primer/ etch primer TDS. Area of damaged primer or rework etc should be prepared as per specified standards, either by power tool cleaning or other means.
Wood : Clean and dry surface. Surface contamination is to be removed by detergents and fresh water cleaning.
Application Method
Spray/ Airless Spray/Brush/ Roller
Mixing Ration
One Component Coating
Thinner and Cleaner
Indokote Thinner (IK.707)
Airless Nozzle Orifice
0.43 - 0.53mm
Nozzle Pressure
176 kg/cm² or 2500 psi
Download Brochure