A single component oxidatively fast drying, rust inhibitive primer, pigmented with Zinc Phosphate as corrosion inhibiting pigment.
It is recommended as primer for Casting & Forging components, Diesel Engines, Pumps, Valves and Heavy Agriculture euipments etc, where fast turn around is required for rapid productivity. It can also be applied over hand prepared steel for use in mild industrial or commercial environment.
Colour
Dark Grey
Finish
Semi Glossy (50-70 GU at 60° angle)
Soild by Volume
55 ± 3%
Supply Weight (Kg/ Ltr)
1.20±0.05
Flash Point
31° C
Dry Heat Resistance
Intermittent : 120°C, Continuous : 100°C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
25-50μ in single coat
Wet Film Thickness
45-99μ in single coat
Therotical Coverage Rate
18.25 sq.mt / lit at recommended DFT of 30μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning. This product is suitable for use over phosphate washed steel.
Steel : Abrasive blast clean to a minimum of Sa2½ (ISO 8501-1:2007). Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner. A surface profile of 30-40 microns is recommended.
Primed Surface : Already primed surface should be dry and free from all contamination and Indoprotect 495 should be applied within the overcoating intervals specified in earlier primer TDS. Area of damaged primer or rework etc should be prepared as per specified standards, either by power tool cleaning or other means.
Application Method
Conventional Spray/ Airless Spray/Brush/ Roller
Mixing Ratio
One Component Coating
Thinner and Cleaner
Indothane Thinner (IK.1701/ IK.900)
Airless Nozzle Orifice
0.33 - 0.45mm
Nozzle Pressure
155 kg/cm² or 2200 psi
Download Brochure