Special Polymer based Heat Oil Resistance Coating

490HOR is a Fast drying, Single component Acrylated polymer based anti corrosive “TRANSFORMER HEAT OIL RESISTANCE’ coating pigmented with Zinc Phosphate as corrosion inhibiting pigment. It protects internal surface of transformer tank from oil heat for maximum 140°C temperature.

  • Colour

    Yellow, White, Green

  • Finish

    Eggshell (20-40 GU at 60° angle)

  • Soild by Volume

    50 ± 3%

  • Supply Weight (Kg/ Ltr)

    1.25±0.05

  • Flash Point

    33° C

  • Dry Heat Resistance

    Intermittent : 140°C, Continuous : 120°C

  • Shelf Life

    12 months

Film Thickness

Recommended film thickness per coat

  • Dry Film Thickness

    30-50μ in single coat

  • Wet Film Thickness

    60-100μ in single coat

  • Therotical Coverage Rate

    16.50 sq.mt / lit at recommended DFT of 30μ

All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning. This product is suitable for use over phosphate washed steel.


Steel : Abrasive blast clean to a minimum of Sa2½ (ISO 8501-1:2007). Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner. A surface profile of 30-40 microns is recommended.


Primed Surface : Already primed (or wash primed) surface should be dry and free from all contamination and Indoprotect 490HOR should be applied within the overcoating intervals specified in earlier primer/ etch primer TDS. Area of damaged primer or rework etc should be prepared as per specified standards, either by power tool cleaning or other means.

  • Application Method

    Spray/ Airless Spray/Brush/ Roller

  • Mixing Ratio

    One Component Coating

  • Thinner and Cleaner

    Indokote Thinner (IK.900/ IK.1701)

  • Airless Nozzle Orifice

    0.33 - 0.45mm

  • Nozzle Pressure

    155 kg/cm² or 2200 psi

quick inquiry