Two component air drying Polyurethane finish for General Industrial applications.
This product has good weather resistant and is suitable for use in both new construction and as a maintenance finish, which can be used in a wide variety of environments including offshore structures, chemical and petrochemical plants, bridges, pulp and paper mills, and in the power industry. This product is recommended as topcoat over epoxy or PU primers for better aesthetics and corrosion resistance.
Colour
Any IS/ RAL/ Custom Shades
Finish
Glossy (70-85GU)
Soild by Volume
42 ± 2%
Supply Weight (Kg/ Ltr)
1.05±0.05
Flash Point
31° C
Dry Heat Resistance
Intermittent : 100°C, Continuous: 80°C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
30-50μ in single coat
Wet Film Thickness
70-120μ in single coat
Therotical Coverage Rate
15.0 sq.mt / lit at recommended DFT of 30μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning.
Primed Surface : Indothane 4090X should be always be applied over anti corrosive primed surface. For final smooth finish, proper sanding of already coated primer is recommended. Existing system should be dry and free from loose paint, salt, grease and other contaminants prior to overcoating.
Maintenance : Area of damage or rework etc should be prepared as per specified standards, either by power tool cleaning or other means. A patch primer should be applied before application of Indothane 4090X for desired performance of the product.
Application Method
Spray/ Airless Spray/Brush/ Roller
Mixing Ration
9 Part (Base) : 1 Part (Hardener)
Pot Life
Three Hours at 30°C
Thinner and Cleaner
Indothane PU Thinner (IK.1701/ IK.1705)
Airless Nozzle Orifice
0.33 - 0.45mm
Nozzle Pressure
155 kg/cm² or 2200 psi
Download Brochure