A single component, matt, high solids, fast drying, modified alkyd based finish. Specailly design to provide optimum performance, where low sheen or matt topcoat is needed.
Indoauto 4040HB is specially developed to use as a rapid drying system for fast handling times and maximising the production throughput. It is recommended for construction and mining heavy machinery, agricultural equipment, railcars, transportation vehicles, material handling and lifting equipment, pumps, valves, gear units and other small motors and machinery.
Colour
Any IS/ RAL/ Custom Shades
Finish
Matt to Eggshell (10-40 GU at 60° angle)
Soild by Volume
62 ± 3%
Supply Weight (Kg/ Ltr)
1.25±0.05
Flash Point
29° C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
40-80μ in single coat
Wet Film Thickness
65-130μ in single coat
Therotical Coverage Rate
13.00 sq.mt / lit at recommended DFT of 50μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning.
Primed Surface : The primed surface should be dry and free from all contamination and Indoauto 4040HB should be applied within the overcoating intervals specified in primer TDS. Area of damaged primer or rework etc should be prepared as per specified standards, either by power tool cleaning or other means.
Steel : Abrasive blast clean to a minimum of Sa2½ (ISO 8501-1:2007). Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner. A surface profile of 30-40 microns is recommended.
Application Method
Spray/ Airless Spray/Brush/ Roller
Mixing Ration
One Component Coating
Pot Life
NA
Thinner and Cleaner
Indokote Thinner (IK.707)
Airless Nozzle Orifice
0.48 - 0.53mm
Nozzle Pressure
176 kg/cm² or 2200 psi
Download Brochure