updraftplus domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home1/indoksf5/public_html/wp-includes/functions.php on line 6114A Single component acrylic modified polymers based, pigmented with aluminium to provide glossy lustre appearance. Indoprotect 4490 metallic is a fast air drying finish coat and can be forced dry also at low bake temperature for faster turn around.
This product is recommended as topcoat over suitable Acrylic, PU or Epoxy primers for better aesthetics and corrosion resistance. Indoprotect 4490 is specialized developed coating to provide excellent durability. It is recommended as finish coat on sheet metal, steel structure etc in Casting & Forging Industries, Heavy Material Handling and other Heavy Equipments, Infrastructural, Electrical and General fabrication industries.
Colour
Custom Metallic Shades
Finish
Glossy (80-95 GU at 60° angle)
Soild by Volume
52 ± 3%
Supply Weight (Kg/ Ltr)
1.05±0.05
Flash Point
26° C
Dry Heat Resistance
Intermittent : 120°C, Continuous: 100°C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
30-60μ in single coat
Wet Film Thickness
55-110μ in single coat
Therotical Coverage Rate
15.50 sq.mt / lit at recommended DFT of 35μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning. This product is suitable for use over phosphate washed steel.
Primed Surface : The primed surface should be dry and free from all contamination and Indoprotect 4490 Metallic finish should be applied within the overcoating intervals specified in primer TDS. Area of damaged primer or rework etc should be prepared as per specified standards, either by power tool cleaning or other means. It can be overcoated with clear coat for high gloss requirment.
Steel : Abrasive blast clean to a minimum of Sa2½ (ISO 8501-1:2007). Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner. A surface profile of 30-40 microns is recommended.
Application Method
Spray/ Airless Spray/Brush/ Roller
Mixing Ration
One Component Coating
Pot Life
NA
Thinner and Cleaner
Indokote Thinner (IK.900 or IK.1701)
Airless Nozzle Orifice
0.28 - 0.33mm
Nozzle Pressure
155 kg/cm² or 2200 psi
Download Brochure