Single component Acrylic resin based amino cured stoving finish is a well-balanced translucent type of flamboyant finish with highly selective light fast pigments to give excellent gloss, light fastness, durability and resistance to gasoline. It should be applied over Hi Sparkles paint to give flamboyant effect.
Indokote 1069F flamboyant finish is a balanced formula blended with selective additives and specialized pigments which impart its exceptional color retention, high gloss and smooth finish coupled with film flexibility, hardness and solvent resistance. It is highly recommended for bi-cycles, two wheeler and battary operated vehicles, where flamboyant effects are needed.
Colour
Range of Customized Shades
Finish
High Glossy (90+ GU at 60° angle)
Stoving Schedule
135°C±5°C for 30 mins
Supply Weight (Kg/ Ltr)
1.00±0.05
Flash Point
26° C
Supply Viscosity ( at 30°C temerature)
70 ± 10 Seconds @ F-4 Cup
Shelf Life
6 months
Recommended film thickness per coat
Dry Film Thickness
25-40μ in single coat
Wet Film Thickness
65-100μ in single coat
Therotical Coverage Rate
12.50 sq.mt / lit at recommended DFT of 30μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning.
Automotive System : Indostov 1069F stoving should always be directly applied over hi sparkle stoving primer Highly recommended as final coat in two or three coat wet-on-wet electrostatic spray coating system.
Primed Surface : Indostov 1069F can be applied over anti corrosive primed surface, however flamboyant effects can only be possible, if an aluminium pigmented primer or mid coat is being applied below it. For final smooth finish, proper sanding of already coated primer is recommended. Existing system should be dry and free from loose paint, salt, grease and other contaminants prior to overcoating.
Application Method
Electrostatic or Conventional Spray/ Pressure Feed
Application Viscosity
20 ± 02 Seconds @ F-4 Cup at 30°C
Thinner and Cleaner
Indokote Thinner (IK.1707)
Inter Coat Time
05–10 Minutes (depending on booth temperature)
Flash Off Time
10–15 Minutes (depending on booth temperature)
Recommended Booth Conditions
Temperature: 25–30°C, Relative Humidity: 55–70 %
Download Brochure