Two component Polyurethane based, Aliphatic Hardener cured PU finish for Top coatings. Indothane 4080is recommended for Heavy Machineries and Equipments for excellent weather protection.
This product has excellent weathering resistance. This product is recommended as topcoat with epoxy orPU primers for better aesthetics and corrosion resistance. It is recommended for Agriculture Implements,Heavy Construction and Mining Machineries, Trucks etc and also highly recommended for Chemical Plants, Electrical and Power Industries, Petrochemical complexes, Steel and Infrastructure Projects.
Colour
Any IS/ RAL/ Custom Shades
Finish
Glossy (70-85GU)
Soild by Volume
50 ± 2%
Supply Weight (Kg/ Ltr)
1.10±0.05
Flash Point
31° C
Dry Heat Resistance
Intermittent : 100°C, Continuous : 80°C
Shelf Life
12 months
Recommended film thickness per coat
Dry Film Thickness
40-60μ in single coat
Wet Film Thickness
80-120μ in single coat
Therotical Coverage Rate
12.50 sq.mt / lit at recommended DFT of 40μ
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning.
Primed Surface : Indothane 4080 should be always be applied over anti corrosive primed surface. For final smooth finish, proper sanding of already coated primer is recommended. Existing system should be dry and free from loose paint, salt, grease and other contaminants prior to overcoating.
Maintenance : Area of damage or rework etc should be prepared as per specified standards, either by power tool cleaning or other means. A patch primer should be applied before application of Indothane 4080 for desired performance of the product.
Application Method
Spray/ Airless Spray/Brush/ Roller
Mixing Ratio
4 Part (Base) : 1 Part (Hardener)
Pot Life
Three Hours at 30°C
Thinner and Cleaner
Indothane PU Thinner (IK.1701/ IK.1705)
Airless Nozzle Orifice
0.33 - 0.45mm
Nozzle Pressure
155 kg/cm² or 2200 psi
Download Brochure